EDGEMORE™ Loft
.jpg)
EDGEMORE™ Loft — Full-Color Concrete Overlay with Micro Topping
EDGEMORE™ Loft is a pre-pigmented, seamless, trowel-grade concrete overlay. It is designed to be installed without staining. The color you install with the trowel coat is the color it will be. The EDGEMORE™ Loft overlay can mimic the look of tile or marble with the application of two micro-toppings. This extremely sturdy concrete flooring option is a great pick for both home and commercial construction.
Features & Benefits
An affordable alternative to replacing concrete floors due to pop-outs, cracks, discoloration, or other damage
Levels out small inconsistencies in floor surface
It is customizable and can be textured to mimic tile, natural stone, brick, and more.
EDGEMORE™ Loft’s full-color overlay is durable, long-lasting, and doesn’t chip, peel, or fade
The overlay makes the floor strong and resistant to foot traffic, UV rays, and water.
Requires a prepared foundation for application
Where to Use EDGEMORE™
.jpg)
Instructions
1. Apply the Bond Coat
You must first install the bond coat if you want to give your floors a grout pattern. The selected grout color should be applied as the bond coat. The majority of bond coatings are made to be applied to damp flooring.
The bond coat mixture’s square foot ratio differs across manufacturers. Look for directions on the bag. Bond coatings are typically placed at a ratio of 250–300 square feet for each bag.
As soon as you have the right amount of water in your mixing container, add the selected colorant and stir it in. Mix in the overlay after that. For the majority of flooring, two bond coatings are advised for optimum adhesion.
2. Install Micro Toppings
The majority of micro-topping bag mixtures are made to be used on dry floors. Micro-toppings typically have a spread ratio of 300 to 400 square feet per bag. Before applying, don’t be afraid to double-check the manufacturer’s instructions.
Fill the container with the appropriate amount of water, then combine the selected colorant and the overlay.
To prevent the product from thickening too quickly after mixing, divide the slurry into two five-gallon buckets. The ideal method for applying micro-topping is with a steel trowel.
Apply the product in quantities the size of a basketball on the floor and trowel it out in various directions to get rid of the rainbow appearance that a typical concrete finish produces. Alternately, you can spread the substance out randomly around the floor to get rid of the arch appearance. With a micro-topping finish, maintaining a wet line is not a concern.
Apply a second coat of micro-topping after the floor has dried completely, following the desired floor’s colorant ratio.
3. Sanding the EDGEMORE™ Loft Floor
To level out the high places left by the trowel, sand the edges using a palm sander and 80-100 grit sandpaper. To reduce dust, it is advisable to use a palm sander that can be connected to a HEPA vacuum.
After completing the edges, sand the high points on the floor using a 17-inch swing machine equipped with 100 grit and 120 grit sanding screens, black scrubbing pads, and a vacuum port.
Use a broom with fine bristles to sweep up the dust. Re-sanding the floor using the sanding screen is the next step. The floor will begin to take on a bright sheen in this stage.
When you’ve got the desired effect, sweep the floor with a broom with fine bristles before vacuuming it with a wand with a brush attachment. By using the brush attachment, vacuum markings on the floor are avoided.
4. Sealing the Floor
Water-based sealer
Urethane (water-based or solvent-based)
Water-based epoxy
Please only use the following types of floor sealers:
Or 100% solid epoxy
We do not recommend solvent-based acrylics or polyaspartics.
EDGEMORE Loft Service Areas in Little Rock Area
Resinous Flooring Supply Little Rock is proud to be the #1 rated supplier of commercial, residential, and industrial epoxy flooring in the Central Aransas area.
Our Arkansas Location is Convenient to Most Cities in the Little Rock Area
Little Rock
Conway
Benton
Bentonville
Fayetteville
Hot Springs
Akadelphia
White Hall
Hundreds of Satisfied Customers, Countless Possibilities
With hundreds of successful projects under our belt, we’re proud to be the go-to supplier for concrete and epoxy coating solutions in Arkansas.
Chad
2024-11-19
Such an amazing team!! Pricing was great and the product quality was excellent.
Chad
2024-11-19
Such an amazing team!! Pricing was great and the product quality was excellent.
Chad
2024-11-19
Such an amazing team!! Pricing was great and the product quality was excellent.
Epoxy Quartz Flooring System FAQ
-
How long will an epoxy floor coating last?Epoxy floors are known for their incredible durability, and with the proper care and optimum maintenance, they can last up to 10 years or more. Our team can guide you on the best practices to ensure the longevity of your epoxy coatings.
-
Can I use epoxy for my living room flooring?Yes definitely. Although many people associate epoxy coatings with a commercial area, they are just as valuable and functional for a residential space like a living room. In fact, you’ll be surprised at the compliments that come your way with an epoxy floor.
-
How much does it cost to choose epoxy flooring in Arkansas?The cost often varies as per the choice of your product but on average; it ranges from $7 to $11 per square foot in the city. You can contact our experts for a customized quotation as per your project.
EDGEMORE Loft Services Near You in Arkansas
Ready to enhance the beauty and functionality of your floor?
Call us today for a quote and to see how we can help!
Arkansas Full-Color Concrete Overlay Flooring Supplier
Call us at (501) 333-7699 if you’re shopping for concrete flooring overlay providers in Arkansas or the surrounding area. If you require any polished, stained, or other sorts of concrete flooring materials, we will be pleased to help.